DigiPlus stock

The DigiPlus stockreason for the engine pulling the cylinder and the treatment The engine, as the heart of the car, bears the heavy responsibility of the power source of the car. However, in the process of car use, the failure of the engine cylinder is a relatively common problem. So, what is the reason why the engine pulls the cylinder? And how to deal with it? Let's take a look at it together. I. The reason why the engine pulls the cylinder 1.The oil line is blocked while the car is driving. When the car is driving, the engine needs to constantly inject fuel into the cylinder to ensure normal operation. However, if the oil line is blocked, the fuel will not be able to enter the engine normally, resulting in the inability of some cylinders to work normally, resulting in the situation of the engine pulling the cylinder. Two. Circuit failure while the car is driving. The circuit system of the car is the key to the normal operation of the engine. If there is a failure, it will affect the normal operation of the engine. If the circuit system fails during the operation of the engine, it will cause some cylinders of the car to not work properly, resulting in the problem of the engine pulling the cylinder. 3. Cylinder wall wear The cylinder wall is one of the key parts in automobile engines, and its wear will seriously affect the normal operation of the engine. If the cylinder wall is damaged or worn excessively, it will cause some cylinders of the car to fail to work properly, resulting in the engine pulling the cylinder.Four. The cauterization of the cylinder head during the driving of the car is one of the very important parts of the car engine. If it is cauterized, it will cause some cylinders of the car to not work normally, resulting in the situation of the engine pulling the cylinder. II. Treatment of engine cylinder 1. One of the common reasons for checking the engine cylinder of the oil line system is the blockage of the oil line, so it is necessary to check whether the oil line system is normal first. If there is a blockage or other fault in the system, it is necessary to clean up or replace the damaged parts in time to ensure that the fuel enters the engine normally. Two. Check the circuit system. If the reason why the engine pulls the cylinder is a circuit failure, it is necessary to check whether the circuit system of the vehicle is normal. If a fault is found, the damaged parts need to be replaced in time. At the same time, when repairing the circuit, you need to pay attention to safety issues to avoid losses caused by wrong operation. 3.Another reason for checking the cylinder wall engine pulling is the wear or damage of the cylinder wall. In this case, the engine needs to be removed and the cylinder wall needs to be repaired or replaced. When repairing or replacing, you need to use professional tools and follow the corresponding safety operating procedures to ensure the smooth progress of the work. Four. Check the cylinder head. If the cylinder head is cauterized, it needs to be repaired or replaced to ensure that the engine can work properly. When choosing a maintenance plan, you need to decide which plan to use according to the specific situation. In summary, engine cylinder pulling is a relatively common failure, and there may be many reasons. However, as long as the problem is checked and solved in time, the normal operation of the car can be ensured. Therefore, during the use of the vehicle, it is recommended that the engine be checked and maintained regularly to reduce the possibility of failure.At the same time, we should also pay attention to abide by the traffic rules to avoid accidents such as engine pulling and cylinder due to illegal acts such as drunk driving.

Contact Us
Phone：020-83484602